Olivetti d-Copia 163MF User Manual

1-3-7
(2) Common setting
Message Language
Select the language of the message display.
1. Press the W or X key to select the language to be
used in the display and press the OK key.
The display changes to the selected language and
returns to the ready screen.
Sleep Mode
Conserve power when it is not operating.
1. Press the W or X key to select [13. Sleep Mode].
2. Press the W or X key to select the time for the
Sleep Mode to engage and press the OK key.
Initial setting: 15 min
The display returns to the ready screen.
Toner Install
Resets the toner counter after replacing the toner con-
tainer.
1. Press the W or X key to select [14. Toner Install].
2. Press the W or X to select [On] and press the OK
key.
The display returns to the ready screen.
Buzzer
The Buzzer can be set to sound when a key on the oper-
ation panel is pressed or in cases when errors occur, etc.
1. Press the W or X key to select [16. Buzzer].
2. Press the W or X to select [On] or [Off]. Press the
OK key. The display returns to the ready screen.
Drum Reset
Perform the drum reset procedure when the drum unit
has been replaced.
1. Press the W or X key to select [17. Drum Reset].
2. Press the W or X to select [On] and press the OK
key. The display returns to the ready screen.
Drum Refresh
The drum refresh is cleaning the drum surface. If poten-
tial printing quality problems has occurred, perform the
drum refresh.
1. Press the W or X key to select [18. DrumRefresh].
2. Press the W or X to select [On] or [Off]. Press the
OK key. The display returns to the ready screen.
Drum Control
The drum control is cleaning the drum surface automati-
cally when the machine is turned on.
1. Press the W or X key to select [19. DrumControl].
2. Press the W or X to select the cleaning time.
Setting range: 0/90/155
Press the OK key. The display returns to the ready
screen.
Eco Fuser
When this mode is selected On, the fuser heater is
switched off during sleep mode to save power consump-
tion. However, warm-up time becomes longer than Off.
1. Press the W or X key to select [110. Eco Fuser].
2. Press the W or X to select [On] or [Off]. Press the
OK key. The display returns to the ready screen.
(3) FAX setting (d-Copia164MF only)
Setting the Current Date and Time
Set the date and time of the built-in clock.
1. Press the W or X key to select [41.Date/Time].
2. Enter the current date and time using the numeric
keys and press OK key. The display returns to the
ready screen.
Entering FAX Information
Enter your station name and FAX number.
1. Press the W or X key to select [42.Fax Header].
2. Enter your station name using the numeric keys
and press OK key.
3. Enter your FAX number using the numeric keys
and press OK key. The display returns to the ready
screen.
Selecting the Line Type
Choose the line type corresponding to your telephone
service.
NOTE: This menu works for 120 V specifications only.
1. Press the W or X key to select [43.Tone/Pulse].
2. Press the W or X key to select [Tone] or [Pulse
10PPS] and press OK key. The display returns to
the ready screen.
Number of Ring Setting
Sets the number of ring until the facsimile starts reception
automatically in Automatic FAX reception or Auto FAX/
Tel Switching.
1. Press the W or X key to select [44.No. of Rings].
2. Press the W or X key to select a number of ring (1-
10) and press OK key. The display returns to the
ready screen.
Reception Mode Settings
Choose the ideal mode for your needs.
1. Press the W or X key to select [45.RX Mode].
2. Press the W or X key to select a reception mode,
and press OK key. The display returns to the ready
screen.
Configuring TTI Settings
Chooses whether to send TTI (Transmit Terminal Identi-
fier) information.
1. Press the W or X key to select [46.Header].
2. Press the W or X key to select [On] or [Off] and
press the OK key. The display returns to the ready
screen.
Default Settings (image quality and brightness)
Selects the default value of image quality and brightness.
1. Press the W or X key to select [47. Def. Res.] or
[48. Def. Bright] and press the OK key.
2. Press the W or X key to select a desired setting
value, and press the OK key.
Setting range
STD./Fine/S-Fine/Photo
Dark/Normal/Light
The display returns to the ready screen.
Y107330-8 Service Manual

Olivetti d-Copia 163MF Specifications

General

Brand	Olivetti
Model	d-Copia 163MF
Category	Printer
Language	English