27
4
10
Enter the IP address, subnet
mask, and default gateway.
The settings in the above window are
examples.
Be sure to ask your network
administrator for the correct IP address,
subnet mask, and default gateway to be
entered.
11
Click the "Next" button.
12
Click the
"
Yes
"
button when a confirmation dialogue box appears.
Go to step 11 on page 28.
LPR (TCP/IP) direct printing
After step 1-7 on page 25-26
8
Click the "Printer Driver" button.
If you have not set the IP Address, click
the "Set the IP Address" button first and
go to step 8 on page 26.
• The "Ethernet Address" is indicated on the left side of the machine
near the LAN connector.
•
If the machine can not be recognized, enter the Ethernet Address and
click the "Initialize" button to initialize the IP address. Follow the
on-screen instructions to click the "OK" button and then the "Search"
button. If the machine is still not recognized, disable your computer’s
firewall and then repeat the installation from the beginning.
When "Get IP Address Automatically" is selected, the IP address may at
times change automatically. This will prevent printing. In this event,
select "Assign IP Address" and enter the IP address.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
