31
4
7
In the printer port selection window, verify the network printer
that is shared and whether the machine is to be used as the
default printer, make the selections and click the "Next" button.
Follow the on-screen instructions.
8
You will return to the window of step 3. Click the "Close" button.
This completes the installation of the software.
Sharing the printer using windows networking
(d-Copia 201D)
If the machine will be used as a shared printer on a network, follow these steps to
install the printer driver in the client computer.
1
Perform steps 3 through 7 in "Using the machine as a network
printer" (p.25 - p.26).
2
Click the "Printer Driver" button.
• If you are using Windows Vista and a security warning window
appears, be sure to click "Install this driver software anyway".
• If you are running Windows 2000/XP and a warning message appears
regarding the Windows logo test or digital signature, be sure to click
"Continue Anyway" or "Yes".
After the installation, a message prompting you to restart your computer
may appear. In this case, click the "Yes" button to restart your computer.
To configure the appropriate settings in the print server, see the
operation manual or help file of your operating system.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
