Olivetti d-Copia 200D User Manual

71
9
*1 When standard A4 paper is used under the operating conditions.
*2 Feed paper lengthwise only.
*3 Leading and trailing edges.
*4 Along the other edges in totals.
*5 When making multiple duplex copies, the copy speed will vary based on the environment conditions.
*6 Print speed during printing of the second sheet and following sheets when using A4 plain
paper in the tray 1 and performing continuous one-sided printing of the same page.
*7 The first-copy time is measured after the power save indicator turns off following power on,
using the document glass with the polygon rotating in the copy ready state and "Selection of
copy start state" set to ON in the user programs (A4), paper fed from paper tray).
The first-copy time may vary depending on machine operating conditions and ambient
conditions such as temperature.
*8 Not including toner/developper and drum cartridges.
Bit depth 1 bit or 8 bit/pixel
Sensor Color CCD
Scanning speed Max. 2.88ms/line
Memory 16 MB
Power supply
Local voltage ± 10% (For this copier’s power supply requirement, see
the name plate located on the back of the unit.)
Power consumption Max. 1.0kW
Overall
dimensions
Width 607.6mm 809mm
Depth 462.5mm 492.5mm
Weight
(Approximately) *
8
16.0kg 23.0kg
Unit
dimensions
Width 518.0mm
Depth 462.5mm 492.5mm
Height 295.6mm 465.4mm
Operating conditions
Temperature: 10°C to 30°C
Humidity: 20% to 85%
Emulation GDI
Interface port
USB interface (USB 2.0 Full
Speed)
USB interface (USB 2.0 Full
Speed)
/ LAN (10 Base-T)
Noise level
Sound power level
LwA
Copying mode: 6.4B
Standby mode: 3.3B
Sound pressure level
LpA (reference) (Bystander positions)
Copying mode: 48dB(A)
Standby mode: 17dB(A)
Sound pressure level
LpA (reference) (Operator position)
Copying mode: 52dB(A)
Standby mode: 17dB(A)
Noise emission measurement in accordance with ISO7779.
Emission concentration
(measurement according
to RAL-UZ 62: Edition
Jan. 2002)
Ozone:0.02 mg/m
3
or less
Dust:0.075 mg/m
3
or less
Styrene:0.07 mg/m
3
or less
As a part of our policy of continuous improvement, OLIVETTI reserves
the right to make design and specification changes for product
improvement without prior notice. The performance specification figures
indicated are nominal values of production units. There may be some
deviations from these values in individual units.
d-Copia 200D d-Copia 201D

Olivetti d-Copia 200D Specifications

General

Print technology	Laser
Maximum resolution	600 x 600 DPI
Time to first page (black, normal)	9.6 s
Print speed (black, normal quality, A4/US Letter)	15 ppm
Printing colors	Black
Scanner type	Flatbed scanner
Grayscale levels	256
Copier resize	25 - 400 %
Maximum number of copies	99 copies
Copy speed (black, normal quality, A4)	20 cpm
Total input capacity	300 sheets
Internal memory	16 MB
Dimensions (WxDxH)	518 x 445 x 299 mm
All-in-one functions	Copy, Scan
Standard media sizes	A4
Supported media weight(s)	56/128 g/m²
Color all-in-one functions	scan, n
Compatible operating systems	Windows 98/Me/2000/XP/Vista
USB port	Yes
Standard interfaces	USB 2.0
Market positioning	Home & office

Weight and Dimensions

Weight	17800 g