Olivetti JP 90 - Page 288

Parameter Value Function
Text scale mode (continued)
Word length
(
only EPSON
LQ 850
emulation
)
7bits
8bits
Older computers transmit using a
7-bit word length, or with the
eighth bit set to 1. In most cases,
the 8 bits setting will meet your
requirements.
Slashed Zero
(
not PCL III +
emulation
)
Off
On
Provided to avoid confusion
between the zero (0) and the
upper case “o” (O). It is
independent of your application
driver.
Print size
(
not PCL III +
emulation
)
Normal
Condensed
Select “Condensed” to reduce the
character width.
Parameter Value Function
Line Feed length
(
not PCL III +
emulation
)
6lpi
8lpi
7/72 inch
5mm
Allows you to select the depth
of each LF code received. In
most cases, your application
driver handles this auto-
matically. The first two
settings indicate a number of
lines per inch (lpi); the other
two settings are absolute
settings for individual line
feeds.
Alternative Graphic
Mode (AGM)
(
only IBM Proprinter
X24 emulation
)
Off
On
Allows your printer to handle
EPSON LQ 1000 or LQ 800
graphic data.
Character table
(
only IBM Proprinter
X24 emulation
)
Table 1
Table 2
With Table 2, you can print
Upright and Italic characters.
With Table 1, the Italic
characters are not available,
but are replaced with the
printer function codes.
63 lines
of text
DISABLED
66 lines
of text
ENABLED
BOF = 12.7 mm
11 in
(Letter size)
A-16 Programmable Printer Features - User-Definable Parameters