Olivetti MT-502 - Sensor Check; Check Procedure; Sensor Check Screen

4. Sensor check Field Service Ver. 2.0 Jan. 2008
8
MT-502
Adjustment / Setting
4. Sensor check
4.1 Check procedure
A. Procedure
1. Call the Service Mode to the screen.
See P.338 of the main body service manual.
2. Touch [State Confirmation].
3. Touch [Sensor Check].
4. Touch three times [z].
4.1.1 Sensor check screen
•This is only typical screen which may be different from what are shown on each individ-
ual main body.
4510F3E518DA
d-Color MF350 / d-Color MF250 / d-Color MF201Plus
d-Color MF450
4510F3E515DA
Service Manual Y108462-9