Field Service Ver. 2.0 Jan. 2008 6. Jam display
11
MT-502
Troubleshooting
Troubleshooting for d-Color MF350 / d-Color MF250 /
d-Color MF201Plus
6.Jam display
6.1 Misfeed display
• When misfeed occurs, message, misfeed location “Blinking” and paper location “Light-
ing” are displayed on the touch panel of the main body.
6.1.1 Misfeed display resetting procedure
• Open the corresponding door, clear the sheet of paper misfed, and close the door.
Display Code Misfeed location Misfeed access location Action
[1] 7290 Vertical transport section Right door P. 1 4
4510F4C507DA
[1]
Y108462-9 Service Manual
To Next Page
Loading...
