Olympus BX3M-CB - Operation Procedures; Turning on the Main Switch (BX3 M-CBFM Only)

9
BX3M-CB/CBFM
2 Operation procedures
2-1 Turning ON the main switch (BX3M-CBFM only)
Set the main switch of BX3M-CBFM to (ON). The beep sound is
heard once.
1
1
This section describes the procedure to turn ON the main switch of the BX3M-CBFM.
If you use the BX3M-CB, turn ON the main switch of the microscope frame. For details, refer to the instruction manual of
BX53M system microscope.