Olympus bx40 - Page 46

OLYMPUS B-MAA MICROSCOPE
GUIDE TO CLEANING AND ADJUSTMENT
CLEANING THE MICROSCOPE STAND AND COMPONENTS
Mount a specimen and set your correct interpupillary | Softly brush clean all mechanical parts of the | Remove the stage and condenser (and also, on the
distance. At the same time, check any areas suggesting | microscope. B-Max 50, the revolving nosepiece) from the
a need for mechanical and/or optical maintenance. microscope stand.
Clean any visible dirt spots with alcohol. Do not use
ether/alcohol mixture, which can cause damage.
Do a final check of the microscope image, by | Reset the interpupillary distance to its original
observing a specimen. condition.
Cleaning Materials
Ai
Lens tissue Ethyl Alcohol 70:30 Ether-Alcohol Mixture Cotton swabs (Q-tips) Soft Gauze
OLYMPUS
A-24A