Olympus bx40 - Page 47

VLEANING
FUM
DEILIOCN
VDSENVALIUN
AND
PHOTOMICROGRAPHY
Microscope
components
get
dirty
with
time.
Dirt
and
dust
particles
on
the
optical
components
are
especially
damaging
to
image
quality.
When
photographing
important
specimens
which
cannot
be
rephotographed,
visible
dust
particles
on
the
picture
can
be
most
frustrating.
Therefore,
we
suggest
the
following
critical
microscope
components be kept clean and dust-free.
o?
Photoeyepiece
Remove and clean, since dust particles
will be focused on the film plane.
(0
Eyepieces /
Eyepieces get dirty frequently. Wipe
carefully and gently so as not to damage
the lens coating.
Objectives ==>
Dirt and dust particles directly affect > 7
the microscope image. Wipe thoroughly
and carefully with a cotton swab. Ed)
Condenser
Dirt and dust particles are easily seen.
Always dust and wipe clean.
Sl) AT
Filter and Light Exit Window
Dust and dirt particles here have minimal
effect on the image. However, the overall
appearance requires frequent cleaning. Wipe
evenly since this is a wide surface area.
_ slO E:
Video Camera
Wipe dust particles appearing on the
monitor screen, If the particles move
only when the specimen or condenser
is moved, clean the specimen and/or
condenser. If the particle does not
move when the CCTV camera is
rotated, clean the camera chip.
5 と ©
e
Built-in Filters
Difficult to clean. Please consult your
Authorized Olympus Microscope Dealer.
Mirror for Large Format Attachment
Dust and dirt particles here affect pictures. Difficult
to clean without damaging the mirror surface, we
advise you to contact your Authorized Olympus
Microscope Dealer.
OLYMPUS
A-24B