178
RESETTING PRINT RESERVE
This resets all the print reserve settings for images saved in a card.
1
Set the Mode dial to and
display a still picture.
2
Press .
● The Print order setting screen is
displayed.
● If there are no pictures on the card,
this screen is not displayed.
3
Press to select RESET, then
press the OK button.
● To keep the print order, select
KEEP and press the OK button.
● To remove the selected image
only, set the number of prints in
Single-frame print reserve to 0.
● If RESET is selected, the print reserve will be canceled for all the images in
the card.
Note:
To Next Page
Loading...
