182
CONNECTING DIRECTLY TO A COMPUTER BY
CABLE
Connect the camera to a personal computer (IBM PC/AT compatible, Apple
Macintosh).
This camera is equipped with 2 transfer connectors.
If your computer is equipped with a USB interface and is running either are
Windows 98/98 Second Edition/2000 Professional or Macintosh OS, you can
transfer picture data via a USB cable.
If your personal computer is not equipped with a USB interface or is running
Windows 95/NT4.0 or Macintosh OS, you can transfer data via a serial cable.
To connect this camera directly to a personal computer, it must have either a
serial port or USB port.
This section explains how to use the camera’s transfer function and how to
save pictures on a personal computer using CAMEDIA Master.
First, make sure you have a suitable cable to connect the camera to your
personal computer and that CAMEDIA Master is installed on your computer.
Cable connection
● It is not possible to transfer data to a personal computer via a cable unless
you use CAMEDIA Master 2.0 to capture pictures. For more details on
using a USB connector, read “Computer Operating Environment” (P. 183).
Note:
To Next Page
Loading...
