185
Use the appropriate connector according to your computer’s specifications.
Connecting to your personal computer
● For USB-equipped computers (IBM PC/AT compatible, Apple
Macintosh)
Connect the USB cable to the USB port on your computer.
● For serial port-equipped computers (IBM PC/AT compatible)
Connect the RS-232C PC serial cable to the serial port (COM1, COM2,
etc.) on your computer.
USB port
USB connection cable
Camera’s
USB
connector
Camera’s
Serial
connector
Serial port
RS-232C PC serial cable
1
Install CAMEDIA Master on your personal computer beforehand.
● For installation, refer to the CAMEDIA Master installation guide or on-
line manual.
2
Make sure the personal computer and camera are turned off.
3
Connect to the personal computer.
● Connection methods vary according to the type of cable you are using.
To Next Page
Loading...
