You can adjust exposure manually by +/– 2 (in increments of approx. 1/3). If
you want a white object to appear as white as possible, adjust + to increase
the exposure. If you want a black object to appear as black as possible,
adjust – to decrease the exposure.
1
Set the Mode dial to P, A, S, S-Prg
or .
● The exposure setting will be
displayed.
2
Press on the Arrow pad for +
adjustment and for –
adjustment.
● When exposure is set to any value
other than 0, is displayed on
the control panel.
99
RECORDING—brightness/exposure
Compensating for lighting conditions —
Exposure compensation
Images
become
darker
Images
become
lighter
1
2
Exposure compensation
Menu (still picture recording mode)
● Unless OFF is selected in All Reset, the setting will be canceled when the
power is turned off (p. 148).
● If the subject is mostly dark, the exposure compensation does not function
effectively. In such a case, display the recorded picture and check the
brightness.
● You cannot correct the amount of light in this mode. To adjust brightness,
refer to page 109.
Note:
To Next Page
Loading...
