75
5
Press the OK button.
● The movie display will start after
the card access lamp stops
blinking.
When you want to pause...
Press the OK button while displaying
images.
You can display frames with the
Arrow pad when normal displaying
is paused or stopped.
: Jumps to the beginning of the
movie.
: Displays the end of the movie.
: Every time the right arrow is
pressed, the next frame will be
displayed. A movie is displayed
by holding down the right arrow
continuously.
: Every time the left arrow is
pressed, the previous frame will
be displayed. A movie is
displayed in reverse by holding
down the left arrow
continuously.
6
Press to leave the movie
picture display mode.
● When selecting other frames, press
again to turn the menu screen
off, then press the Arrow pad to
select the frames.
..
If you want to return to the record mode immediately
Press the shutter button halfway. The viewfinder will appear with the subject
displayed on it, even in the middle of displaying movies or when the menu
screen is on.
5
5
6
To Next Page
Loading...
