16 En
En
7 Press ac to set the year, then press d to move to the
month setting.
• To move back to the previous setting, press b.
• The first two digits of the year are fixed.
8 Repeat this procedure until the date and time are
completely set.
• The time is displayed in the 24-hour format. Consequently, 2 p.m. is
displayed as 14:00.
9 Press e.
• For a more accurate setting, press e when the time signal hits 00
seconds. The clock starts when you press the button.
10 To turn the camera off, set the power switch to OFF.
• The date and time settings will be canceled if the camera is left
without battery for approximately 6 days.
Note
basic_e_x193_6.fm Page 16 Wednesday, July 9, 2003 12:50 PM
To Next Page
Loading...
