En 39
En
J PLAYBACK ON A TV
Use the video cable provided with the camera to play back recorded images
on your TV. You can play back both still pictures and movies on your TV.
1 Make sure that the TV and camera are turned off. Connect
the VIDEO OUT jack on the camera to the Video input
terminal on the TV using the VIDEO cable.
2 Turn the TV on and set it to the video input mode.
• For details of switching to video input, refer to your TV’s instruction
manual.
3 Set the mode dial to q and turn the camera on.
• The last picture taken is displayed on the TV. Use the arrow pad to
select the picture you want to display.
• The close-up playback, index display and slideshow functions can also
be used on a TV screen.
• You are recommended to use the optional AC adapter when using
the camera with a TV.
• Make sure that the camera’s video output signal type is the same as
the TV’s video signal type.
Connect to the TV’s video input (yellow)
terminal.
video cable
VIDEO OUT jack (MONO)
Note
basic_e_x193_6.fm Page 39 Wednesday, July 9, 2003 12:50 PM
To Next Page
Loading...
