Olympus C-5000Zoom - Setting the Date and Time

En 15
En
• If the camera is subjected to strong vibration or shock while turned
on, power may be interrupted, causing the date and other internal
settings to revert to the factory default status.
J SELECTING A LANGUAGE W
1
Set the mode dial to P and turn the camera on.
2 Press e.
• The top menu is displayed.
3 Press d on the arrow pad to select MODE MENU.
4 Press ac to select the SETUP tab, then press d.
5 Press ac to select W, then press d.
6 Press ac to select a language, then press e.
7 Press e again to exit the menu.
8 To turn the power off, set the power switch to OFF.
J SETTING THE DATE AND TIME X
1
Set the mode dial to P and turn the camera on.
2 Press e.
• The top menu is displayed.
3 Press d on the arrow pad to select MODE MENU.
4 Press ac to select the SETUP tab, then press d.
5 Press ac to select X, then press d.
• The green frame moves to the selected item.
6 Press ac to select one of the following date formats: Y-
M-D (Year/Month/Day), M-D-Y (Month/Day/Year), D-M-Y
(Day/Month/Year). Then press d.
• Move to the year setting.
• The following steps show the procedure used when the date and time
settings are set to Y-M-D.
Note
basic_e_x193_6.fm Page 15 Wednesday, July 9, 2003 12:50 PM