En 13
En
J ATTACHING THE STRAP AND LENS CAP
J CHARGING THE BATTERY
This camera uses one BLM-1 lithium ion battery. Other batteries cannot be used.
The battery is not fully charged at the time of purchase. Before using the
camera, charge the battery using the BCM-2 charger. For more details, read
the instructions provided with the charger.
1 Plug the power cord into the
charger and plug the other end
of the power cord into a
household electrical outlet.
2 Remove the protection cap
from the battery.
3 Place the battery on the
charger, making sure that it is correctly oriented as shown
in the illustration.
• Align the battery with the guideline on
the charger ( ), and insert the
battery into the charger as far as it will
go.
• Meaning of the charge lamp
indications:
Lights red : Charging
Lights green : Charging is completed.
Blinks red : Charging failure
• The battery charges in approximately 6 hours. The charging time may
differ according to the amount of power left in the battery.
1
345
2
Charge indicator
basic_e_x191_6.fm Page 13 Thursday, August 28, 2003 12:44 PM
To Next Page
Loading...
