14 En
En
J LOADING THE BATTERY
1
Make sure the power switch is set to OFF.
2 Slide the battery compartment
lock from = to ) and open the
battery compartment cover.
3 Insert the battery, making sure
that it is correctly oriented as
shown in the illustration.
• The lock secures the battery when
correctly loaded.
4 Close the battery
compartment cover.
5 Slide the battery compartment
lock from ) to =.
J INSERTING A CARD
“Card” in this manual refers to the xD-Picture Card, CompactFlash and
Microdrive. The camera uses the card to record pictures.
1 Make sure the power switch is set to OFF.
2 Open the card cover.
3 Insert a card.
xD-Picture Card
• Insert the card into the slot with the contact
area toward you. Ensure the card is not
inserted diagonally.
• Insert the card as far as it will go until it
clicks.
• If the card is inserted incorrectly oriented or
it is inserted at an angle, the contact area
may be damaged or the card may become jammed.
• If the card is not inserted fully, it may not be able to record data.
Battery lock
Contact area
Notch
Card cover
basic_e_x191_6.fm Page 14 Thursday, August 28, 2003 12:44 PM
To Next Page
Loading...
