En 41
En
•Press e again after playback ends to display the menu.
PLAYBACK : Plays back the entire movie again.
FRAME BY FRAME : Plays back the movie manually one frame at a
time.
EXIT : Leaves the movie playback mode.
Press ac to select the desired operation, then press e.
When FRAME BY FRAME is selected
a : Displays the first frame of the movie.
c : Displays the last frame of the movie.
d : Displays the next frame. The movie can be played continuously by
holding the button down.
b : Displays the previous frame. The movie can be played continuously in
reverse by holding the button down.
e : Displays the MOVIE PLAYBACK menu.
J PROTECTING PICTURES
You are recommended to protect important pictures to avoid accidentally
erasing them.
1 Set the mode dial to q and turn the camera on.
• The monitor turns on.
2 Use the arrow pad or control dial to display the picture
you want to protect.
3 Press 0.
• To cancel protection, press 0 again.
• Protected pictures cannot be erased by the single-frame/all-frame
erase function, but they are all erased by formatting.
J ERASING PICTURES
This function enables you to erase recorded pictures. This can be done either
one frame at a time or to all the pictures on the card at once.
• Once erased, pictures cannot be restored. Check each picture
before erasing to avoid accidentally erasing pictures you want to
keep.
Note
Note
basic_e_x191_6.fm Page 41 Thursday, August 28, 2003 12:44 PM
To Next Page
Loading...
