42 En
En
Single-frame erase
1 Set the mode dial to q and turn the camera on.
• The monitor turns on.
2 Use the arrow pad or control dial to display the picture
you want to erase.
3 Press S.
•The S ERASE screen is displayed.
4 Press ac to select YES, then press e.
• The picture is erased and the menu is closed.
All-frame erase
1 In the top menu, select MODE MENU → CARD → CARD
SETUP, and press d.
2 Press ac to select S ALL ERASE, then press e.
3 Press ac to select YES, then press e.
• All the pictures are erased.
J FORMATTING (CARD SETUP)
This function lets you format a card. Formatting prepares cards to receive
data. Before using non-Olympus cards or cards which have been formatted
on a PC, you must format them with this camera.
• All data stored on the card, including protected pictures, is erased
when the card is formatted. When formatting a used card, confirm
there are no pictures that you still want to keep on the card.
1 In the top menu, select MODE MENU → CARD → CARD
SETUP, and press d.
• P A S M r n m l k j i
The I FORMAT screen is displayed.
• q
The CARD SETUP screen is displayed.
Note
basic_e_x191_6.fm Page 42 Thursday, August 28, 2003 12:44 PM
To Next Page
Loading...
