En 17
En
Power off
1 To turn the power off, turn the power switch
so that OFF is aligned with the ( mark.
• The monitor turns off, the lens retracts and the power
turns off.
2 Turn the monitor towards the camera and
close it.
• To protect the monitor, you are recommended to keep
it closed when the camera is not in use.
J SELECTING A LANGUAGE
1
Set the mode dial to P and turn the camera on.
• You can select the language in all modes.
2 Press e.
• The top menu is displayed.
3 Press d on the arrow pad to select MODE MENU.
4 Press ac to select the SETUP tab, then press d.
5 Press ac to select W, then press d.
6 Press ac to select a language, then press e.
7 Press e again to exit the menu.
8 To turn the camera off, set the power switch to OFF.
J SETTING THE DATE AND TIME
1
Set the mode dial to P and turn the camera on.
• You can set the date and time in all modes.
2 Press e.
• The top menu is displayed.
3 Press d on the arrow pad to select MODE MENU.
4 Press ac to select the SETUP tab, then press d
5 Press ac to select X, then press d.
• The green frame moves to the selected item.
•Press c repeatedly to change the page until X is displayed.
basic_e_x191_6.fm Page 17 Thursday, August 28, 2003 12:44 PM
To Next Page
Loading...
