En 43
En
2 If the mode dial is set to P A S M r n m l k j
i, press a to select YES.
If the mode dial is set to q, press c to select I
FORMAT, then press e. The I
FORMAT screen is
displayed. Press a to select YES.
3 Press e.
•The BUSY bar is displayed and the card is formatted.
J PLAYBACK ON A TV
Use the AV cable provided with the camera to play back recorded images on
your TV. Both still pictures and movies can be played back.
1 Make sure that the TV and camera are turned off.
Connect the A/V OUT jack on the camera to the video
input terminal on the TV using the AV cable.
2 Turn the TV on and set it to the video input mode.
• For details of switching to video input, refer to your TV’s instruction
manual.
3 Set the mode dial to q and turn the camera on.
• The last picture taken is displayed on the TV. Use the arrow pad to
select the picture you want to display.
• The close-up playback, index display and slideshow and other
playback functions can also be used on a TV screen.
• You are recommended to use the optional AC adapter when using
the camera with a TV.
• Make sure that the camera’s video output signal type is the same as
the TV’s video signal type.
Connect to the TV’s video input (yellow)
and audio input (white) terminals.
AV cable
A/V OUT jack (MONO)
Note
basic_e_x191_6.fm Page 43 Thursday, August 28, 2003 12:44 PM
To Next Page
Loading...
