Olympus DM 620 - Changing the playback speed

44
3
EN
Playback
Playback
a
Changing the playback speed
Change the speed according to need such as
listening to meeting content at a fast speed
or reviewing spots that you couldn’t catch
in a language lesson at a slow speed. The
tone will be automatically adjusted digitally
without changing the voice so it sounds
natural.
1 While the recorder is during
playback mode, press the
` OK button.
Normal operation may not be available
depending on the sampling frequency
and the bit rate of the file to be played
back. In such a case, reduce the speed
of the fast playback.
Notes
• As in normal playback mode, you can
stop playback, cue a file, or insert an
index or temp mark in slow playback and
fast playback modes as well (☞ P. 45).
• The slow playback or fast playback is
available even if either [Voice Filter] is
set (☞ P.6 0).
• When using the slow playback or
fast playback function, the following
functions are not available.
• [Noise Cancel] (☞ P. 60)
• [EUPHONY] (☞ P. 60 )
• [Reverb] (☞ P.62)
• The [Speed] setting in the [Voice Guide]
settings (☞ P.75) is disabled during file
playback.
2 Press the + or − button to select
playback speed.
About the limits of fast playback
3 Press the ` OK button.
a Playback speed indicator
• Even if playback is stopped, the
changed playback speed will be
retained. The next playback will be at
that speed.
+ − button
`OK button