63
4
EN
Menu setting method
Menu setting method
. LCD/Sound Menu
Backlight
The display will remain lit for about 10 (Initial
setting) seconds when a button on the
recorder is pressed.
1 Select [Lighting Time] or
[Brightness].
2 Select the setting.
When [Lighting Time] is selected:
[Off]:
Disables this function.
[5seconds] [10seconds] [30seconds]
[1minute]:
Enables the Backlight function.
When [Brightness] is selected:
[High] [Low]:
Sets the brightness of the backlight
when lit.
Contrast
Display contrast can be adjusted in 12 levels.
• You can adjust the LCD display contrast
level from [01] to [12].
LED
You can set it so the LED indicator light does
not turn on.
[On]: LED light will be set.
[Off]: LED light will be canceled
.
Beep
The recorder beeps to alert you to button
operations or warn you of errors. System
sounds may be turned off.
[Volume3]:
Increase the volume of beeps.
[Volume2]:
Return the volume of beeps to normal.
[Volume1]:
Decrease the volume of beeps.
[Off]: Disables this function.
Language(Lang)
You can select the display language for this
recorder.
[English] [Français] [Español]
[Português (BR)]:
• The selectable languages differ
depending on the region.
Voice Guide
See “Guidance [Voice Guide]” (☞ P.75).
Intro Play
You can listen to the first few seconds of a
file by touching the cursor to a file within
a folder. This feature is convenient when
looking for files.
[10seconds]:
The first 10 seconds of a file will be
played.
[5seconds]:
The first 5 seconds of a file will be played.
[3seconds]:
The first 3 seconds of a file will be played.
[Off]:
Disables this function.
To Next Page
Loading...
