Olympus DM 620 - Changing the USB Class [USB Settings]

76
4
EN
Menu setting method
Menu setting method
Changing the USB class
[USB Settings]
Besides setting to [PC] (Connect to PC to
transfer files) or [AC Adapter] (Connect to
AC adapter to recharge the battery), you
can switch the USB class according to your
usage.
[USB Connect]: Setting for connecting
to the PC.
[USB Class]: Setting for USB class.
3 Press the ` OK button.
• If you select [USB Class], proceed to
the operation of Step 6.
1 Select [USB Settings] from the
menu on the [Device Menu].
• For details on how to enter the menu
settings, see “Menu setting method”
(☞ P. 51).
2 Press the + or − button to select
[USB Connect] or [USB Class].
When [USB Connect] is selected:
4 Press the + or − button to change
the setting.
[PC]: Setting for when the recorder is
connected to the PC and used as a
storage device or composite device.
Connected as storage or composite.
[AC Adapter]: Setting for when the
recorder is connected to the PC for
charging or to the AC Adapter (A514)
(optional).
[Optional]: Setting to confirm the
connection method each time a USB
connection is made.
5 Press the ` OK button to
complete the setting.
• If you select [USB Connect], proceed
to the operation of Step 8.
+ − button
`OK button
F2 button
When [USB Class] is selected:
6 Press the + or − button to change
the setting.
[Storage Class]: Recognized as an
external memory device from the PC.
[Composite]: Setting when connected
to the PC and used as an external
memory device, USB speaker or
microphone.