109
EN
7
Customizing your camera
Using reset settings
This resets the camera to the factory default settings. You can also reset the camera to the
[RESET1] or [RESET2] setting.
[RESET] Resets to the factory default settings. For the default settings, see
“Menu directory” (gP. 137).
[RESET1]/[RESET2] Resets to the registered settings.
• Holding down the F button and ISO button at the same time for 2 seconds performs
[RESET].
• While pressing two buttons at the same time, turn the dial to select the reset setting.
Release the button to reset the settings.
1 Select [RESET], [RESET1] , or [RESET2] and press
the i button.
2 Use ac to select [YES], then press the i
button.
Direct buttons F + ISO
Viewfinder : RESET
: RESET1
: RESET2
Control panel
Menu MENU[W][CUSTOM RESET]
RESET1
YES
NO
BACK SET
s0017_e_00_0_unified.book Page 109 Thursday, October 30, 2008 2:47 PM
To Next Page
Loading...
