70
EN
4
Record mode, white balance, and picture mode
Setting display
• Select from [OFF], [3F 2STEP], [3F 4STEP], or [3F
6STEP] for the EV step for both the A-B (amber-blue)
direction and the G-M (green-magenta) direction.
• When the shutter button is pressed down all the way,
3 images adjusted in specified color directions are
automatically created.
To apply WB bracketing to the white balance you have adjusted:
j Adjust white balance manually, then use the WB bracketing feature. WB bracketing is applied to
the white balance you have adjusted.
x Notes
• During WB bracketing, the camera cannot shoot the pictures if there is not enough memory in
the camera and card for storing at least the selected number of frames.
You can select image tone to create unique image effects. You can also fine-adjust image
parameters such as contrast and sharpness for each mode. The adjusted parameters are
recorded in each picture effect mode.
[hVIVID] : Produces vivid colors.
[iNATURAL] : Produces natural colors.
[jMUTED] : Produces flat tones.
[ZPORTRAIT] : Produces beautiful skin tones.
[MONOTONE] : Produces black and white tone.
[CUSTOM] : Select one picture mode, set the parameters, and register the setting.
You can also register the gradation to [CUSTOM]. This setting is stored
separately from [GRADATION] in the menu. g“Gradation” (P. 71)
TIPS
Picture mode
Super control panel ip: [PICTURE MODE]
Menu MENU[W][PICTURE
MODE]
EV step in the G-M direction:
2STEP
EV step in the A-B direction:
4STEP
Viewfinder
Control panel
WB BKT
3F 4STEP
A
-
B
3F 4STEP
G
-
M
SELECT
Direct buttons setting screen
CARD SETUP
CUSTOM RESET
PICTURE MODE
GRADATION
WB
SET
BACK
PICTURE MODE
j
MUTED
i
NATURAL
Z
PORTRAIT
MONOTONE
h
VIVID
s0017_e_00_0_unified.book Page 70 Thursday, October 30, 2008 2:47 PM
To Next Page
Loading...
