95
EN
7
Customizing your camera
• [F] on [MENU] means the horizontal operation of the
dial (the same as pressing bd). [G] means the
vertical operation of the dial (the same as pressing
ac).
DIAL DIRECTION
You can select the rotational direction of the dial and the direction in which the shutter speed/
aperture value will increase or decrease.
AEL/AFL
You can use the AEL/AFL button to perform AF or metering operations instead of using the
shutter button.
Select the function of the button to match the operation when the shutter button is pressed.
Select [mode1] to [mode4] in each focus mode. (You can only select [mode4] in C-AF
mode.)
Setting qe (rotational direction of the dial) rf (rotational direction of the dial)
DIAL1
• Slower shutter speed
• Open the aperture (f-number is
decreased)
• Faster shutter speed
• Close the aperture (f-number is increased)
DIAL2
• Faster shutter speed
• Close the aperture (f-number is increased)
• Slower shutter speed
• Open the aperture (f-number is
decreased)
Mode
Shutter button function AEL/AFL button function
Half-press Full press When holding down AEL/AFL
Focus Exposure Focus Exposure Focus Exposure
[S-AF]
mode1
S-AF Locked kkkLocked
mode2
S-AF kkLocked k Locked
mode3
k Locked kkS-AF k
[C-AF]
mode1
C-AF start Locked Locked kkLocked
mode2
C-AF start k Locked Locked k Locked
mode3
k Locked Locked k C-AF start k
mode4
kkLocked Locked C-AF start k
[MF]
mode1
k Locked kkkLocked
mode2
kkkLocked k Locked
mode3
k Locked kkS-AF k
DIAL MENU
BACK SET
FG
bd
ac
s0017_e_00_0_unified.book Page 95 Thursday, October 30, 2008 2:47 PM
To Next Page
Loading...
