49
EN
2
Exposure
Compensation value: 0.3, 0.7 or 1.0
• The compensation value will change if the EV step is changed. g“EV STEP” (P. 100)
Number of frames: 3 or 5
Setting display
Start shooting.
• In single-frame shooting, the exposure changes every time the shutter button is pressed.
• In sequential shooting, hold down the shutter button until the selected number of frames are
taken.
• Releasing the shutter button stops flash bracketing shooting. When it stops, 0 blinks in
the viewfinder and on the control panel and 0 is displayed in green on the super
control panel.
How AE bracketing compensates exposure in each shooting mode
Depending on the selected shooting mode, exposure is compensated in the following way:
P mode : Aperture value and shutter speed
A mode : Shutter speed
S mode : Aperture value
M mode : Shutter speed
To apply AE bracketing to the exposure value you have compensated:
j Compensate the exposure value, then use the AE bracketing feature. AE bracketing is applied to
the exposure value you have compensated.
Direct button G + AFj/k
Menu MENU[X][AE BKT]
Viewfinder Control panel
TIPS
Number of
frames
EV STEP
Bracketing
Number of
frames
EV STEP
Compensation range
• The exposure value for the remaining frames
blinks during shooting.
s0017_e_00_0_unified.book Page 49 Thursday, October 30, 2008 2:47 PM
To Next Page
Loading...
