80
EN
Menu functions (Shooting menus)
7
Varying settings over a series of photographs (bracketing)
“Bracketing” refers to the act of varying settings automatically over a series of shots
or a series of images to “bracket” the current value. You can store bracket shooting
settings and turn bracket shooting off.
1
Select [Bracketing] in X Shooting Menu 2 and
press Q.
oj/Y
1
2
Time Lapse Settings Off
Off
Back
Shooting Menu 2
Image Stabilizer
Bracketing
HDR Off
Set
Multiple Exposure
#
RC Mode Off
Off
2
After selecting [On], press I and select a bracket
shooting type.
• When you select bracket shooting, t appears on the
screen.
AE BKT
WB BKT
FL BKT
ISO BKT
ART BKT
--
--
--
3f 1.0EV
A-- G--
Bracketing
Back
Set
3
Press I, select settings for parameters such as the number of shots, and
then press the Q button.
• Continue to press the Q button until you return to the screen in step 1.
• If you select [Off] in step 2, bracket shooting settings will be saved and you can shoot
normally.
% Tips
• You can also use button operations for bracket settings. Set the lever to position 2 and
turn the dial while pressing the jYHDR button. Select the bracket shooting type
using the front dial and the number of shots and other parameters using the rear dial.
After performing the settings, you can switch between bracket photography and normal
photography each time you press the jYHDR button.
# Cautions
• Cannot be used during HDR photography.
• Cannot be used at the same time as multiple exposure and time lapse shooting.
AE BKT (AE bracketing)
The camera varies the exposure of each shot. The modi cation amount can be selected from
0.3 EV, 0.7 EV, or 1.0 EV. In single-frame shooting mode, one photograph is taken each time
the shutter button is pressed all the way down, while in sequential shooting mode the camera
continues to take shots in the following order while the shutter button is pressed all the way
down: no modi cation, negative, positive. Number of shots: 2, 3, 5, or 7
• The t indicator turns green during bracketing.
• The camera modi es exposure by varying aperture and
shutter speed (mode P), shutter speed (modes A and M),
or aperture (mode S).
• The camera brackets the value currently selected for
exposure compensation.
• The size of the bracketing increment changes with the value
selected for [EV Step]. g “Using the custom menus” (P. 90)
AE BKT
WB BKT
FL BKT
ISO BKT
ART BKT
--
--
--
--
A-- G--
--
2f 0.7EV
2f 0.3EV
2f 1.0EV
3f 0.3EV
3f 0.7EV
3f 1.0EV
Off
Bracketing
Back
Set
To Next Page
Loading...
Need help?
General
Weight and Dimensions
