100
EN
Menu functions (Custom menus)
7
z (Preview)
Aperture is stopped down to the selected value while the
button is pressed.
k (One-touch white
balance)
The camera measures white balance when the button is
pressed (P. 57).
P (AF area)
Choose the AF target.
P Home
Pressing the button selects the AF target position saved
with [P Set Home] (P. 90). The home AF target position is
indicated by a p icon. Press the button again to return to
AF target mode. If the camera is turned off when the home
position is selected, the home position will be reset.
MF Press the button to select manual focus mode. Press the
button again to restore the previously selected AF mode.
RAWK
Press the button to toggle between JPEG and RAW+JPEG
record modes.
Test Picture Pictures taken while the button is pressed are displayed in the
monitor but are not recorded to the memory card.
Myset1 – Myset4 Switches among the registered Myset settings when the
button is pressed. Press the button again to return.
I/H The button can be used to choose between I and H while
the underwater case is attached. Press and hold the button
to return to the previous mode. If this option is selected,
the FL-LM2 will re even when not raised. When using an
ED12-50mmEZ lens with power zoom (E-ZOOM), the lens
is automatically zoomed to the WIDE end or TELE end in
accordance with I and H switching.
Live Guide Press the button to display live guides.
b (Digital Tele-
converter)
Press the button to turn digital zoom on or off.
a (Magnify)
Press the button to display the zoom frame. Press again to
magnify the image. Press and hold the button to turn off the
zoom frame.
Peaking Each press of the button switches the monitor between
display/non-display. When Peaking is displayed, histogram
and highlight/shadow display are not available.
AF Stop Stop autofocus.
j/Y
Choose a sequential shooting or self timer option.
#
Choose a ash mode.
HDR Switch to HDR with the saved settings.
BKT Turns on BKT shooting using stored settings.
Multi Function Press the button to recall the selected multi function*.
When switching recalled functions, press the button while
turning the dial.
G (Touch panel lock)
Each time the button is pressed, touch panel operation
switches between enabled and disabled.
Electric Zoom When using a lens with a power zoom function, after pressing
the button, use the arrow pad for zooming operations.
* Multi function: b (Highlight&Shadow Control), c
(Color Creator), a (Magnify), d
(Image Aspect)
To Next Page
Loading...
Need help?
General
Weight and Dimensions
