Olympus E-M1 - Attaching the À Ash Unit

15 EN
Preparing the camera and  ow of operations
1
Attaching the  ash unit
1
Remove the terminal cover from the  ash unit and attach the  ash to the
camera.
• Slide the  ash unit all the way in, stopping when it contacts the back of the shoe and
is securely in place.
2
3
1
2
1
UNLOCK switch
2
To use the  ash, raise the  ash head.
• Lower the  ash head when the  ash is not in use.
# Cautions
• When not using the accessory port, be sure to attach the cover.
Removing the Flash Unit
Press the UNLOCK switch while removing the  ash
unit.
2
1
UNLOCK switch