Olympus E-M1 - Inserting and Removing Cards

2
Lightly
press the shutter button down to the first position. (Press halfway.)
• The AF confirmation mark
(e)
will
be
displayed,
and a green frame (AF target) will
be
displayed
in
the focus
location.
Press the shutter
button
halfway.
AF target
Aperture
value
AF confirmation mark
Shutter
speed
•
The
ISO
sensitivity, shutter speed and aperture
value
that have been set
automatically
by the camera are displayed.
• If
the AF confirmation mark
blinks, the subject is not
in
focus.
(P.
136)
3
Press the shutter button again to take a picture. (Press
all
the way down.)
•
The shutter sounds and the
picture
is
taken.
•
The shot image will
be
displayed
on
the monitor.
Pressing the shutter button halfway and
all
the way down
The shutter button has two positions. The act of
lightly
pressing the shutter button to the
first position and
holding
it there is called "pressing
the shutter button
halfway,"
that
of
pressing it
all
the way
down to the second
position
"pressing
the
shutter button
all
(or the
rest of) the way down."
(f)
Cautions
Press
halfway
--~
Press the rest of
the way down
•
You
can change the viewfinder
display style.
In
this
manual, [Style
1]
is
used.
• If
the
angle
of
the monitor has been changed, the viewfinder
will
not
light
up automatically.
• If
you press and hold
down the
101
button, a menu is
displayed that
allows
you to change
the settings for
automatically lighting
up the viewfinder.
EN
113