Using the accessory port menus
You can
make
settings relating to devices connected via the accessory port.
Before Using the accessory port menus
The Accessory Port menu
is
only available when the appropriate option
is
selected for the
[#
0
/~
Menu Display] item
in
the setup menu.
1 Press the
MENU
button to display the menus, and display the t (Setup
Menu) tab.
_2
Select
[##/(@
Menu Display] and set
[l@
Menu Display] to [On].
•
The~
(Accessory Port Menu) tab will
be
displayed
in
the menu.
Accessory Port Menu
1ft
OLYMPUS PENPAL Share
(P.
110)
~
OLYMPUS PENPALAibum
(P.
111)
a Electronic Viewfinder
(P.
111)
• The charger can be used
in
most home electrical sources within the range of 100 V
to
240V
AC (50/60Hz) around the world. However, depending
on
the country or area you
are in, the AC wall outlet may
be
shaped differently and the charger may require a plug
adapter to match the wall outlet. For details, ask at your local electrical shop or travel
agent.
• Do not use commercially available travel adapters as the charger may malfunction.
Flash
FL-LM2
Gno: 7 (ISO 100•m)
Monitor
3.0" TFT color LCD
USB cable CB-USB6
Lithium ion battery
BLN-1
Lithium ion charger
BCN-1
Operating environment (Temperature)
-10°C-
40°C
(14°F-
104°F) (operation)/
-20°C-
60°C
(-4°F-
140°F) (storage)
In this manual, all storage devices are referred to as "cards."
The
following
types
of
SD
memory
card (commercially available) can be
used with this camera:
SD, SDHC, SDXC, and Eye-Fi.
For
the latest
information, please visit the Olympus website.
SO
card write protect switch
The
SO
card body has a write protect switch. If you set the switch to +
the "LOCK" side, you will not
be
able to write to the card, delete data or
format. Return the switch to the unlock position enable writing.
EN
127
To Next Page
Loading...
