43
EN
Basic operations
5
Movie Tele-converter
1
Touch the icon to display the zoom frame.
• You can change the position of the zoom frame by touching the screen or using
FGHI.
• Press and hold Q to return the zoom frame to a central position.
2
Touch K or press the Fn2 button to zoom in on the area in the zoom
frame.
• Touch L or press the Fn2 button to return to the zoom frame.
3
Touch O or press Q to cancel the zoom frame and exit Movie tele-
converter mode.
# Cautions
• The frame rate will drop slightly during recording.
• The 2 effects cannot be applied simultaneously.
• Use a memory card with an SD speed class of 6 or better. Movie recording may end
unexpectedly if a slower card is used.
• Taking a photograph during movie recording cancels the effect; the effect does not appear
in the photograph.
• [e-Portrait], [Diorama] and [Color Creator] cannot be used at the same time as Art Fade.
• Movie Tele-converter cannot be used when [Picture Mode] is set to [ART].
• The sound of touch operations and button operations may be recorded.
• Besides using touch operations, you can apply effects using the buttons corresponding to
the displayed icons.
To Next Page
Loading...
