6
EN
Basic guide
Open the card cover and insert the card
Removing the card
• Never open the card cover while the card access lamp is blinking.
Loading the card
CompactFlash/Microdrive xD-Picture Card
Insert the card until it is locked into place.Insert the card’s contact area into the slot as far as
it can go.
xD-Picture Card slot
Card cover
CF card slot
Card access lamp
W Mark
CompactFlash/Microdrive xD-Picture Card
• Press the inserted card lightly and it will be
ejected.
• Pull out the card.
• Press the eject button all the way in and let it
pop out, then press it all the way in again to
eject the card.
• Pull out the card.
Eject button
s0013_e_00_unified.book Page 6 Monday, March 5, 2007 10:04 AM
To Next Page
Loading...
