68
EN
Playback functions
4
2 Press p to display the next images you want to protect and press the
i button.
3 After you have selected the images to protect, press the 0 (protect)
button.
Canceling all protections
This function lets you cancel the protection of several images at one time.
1 MENU[q][RESET PROTECT]
2 Use ac to select [YES], then press i.
Lets you erase recorded images. You can select single-frame erase, which erases only the
currently displayed image; all-frame erase, which erases all the images stored on the card; or
selected frame erase, which erases only the frames selected.
Single-frame erase
1 Play back the image you want to erase.
2 Press the S (erase) button.
3 Use ac to select [YES], then press i.
x Notes
• Formatting the card erases all images even if they have been protected. (gP. 100)
• Protected images cannot be rotated.
Erasing images
x Notes
• For image file types recorded using RAW+JPEG, single-frame erase erases only the JPEG
images while the RAW data is retained. For all-frame and selected frame erase, both the RAW
and JPEG images are erased.
• Protected images cannot be erased. Cancel protected images, then erase them.
• Once erased, images cannot be restored. g “Protecting images k Preventing accidental
erasure” (P. 67)
S button
s0013_e_00_unified.book Page 68 Monday, March 5, 2007 10:04 AM
To Next Page
Loading...
