Olympus EVOLT E-410 - All-Frame Erase; Erasing Selected Frames

EN 69
Playback functions
4
All-frame erase
1 MENU[W][CARD SETUP]
2 Use ac to select [ALL ERASE], then
press i.
3 Use ac to select [YES], then press i.
• All frames will be erased.
Erasing selected frames
This function lets you erase selected images at one time during single-frame playback or
index display.
1 Display the images you want to erase and press the i button.
• The selected images will be shown with red frames.
• To cancel your selection, press the i button again.
• During index display, press p to select the images you want to erase and press the i
button.
2 Press p to display the next images you want to erase and press the i
button.
3 After you have selected the images to erase,
press the S (erase) button.
4 Use ac to select [YES], then press i.
s0013_e_00_unified.book Page 69 Monday, March 5, 2007 10:04 AM