EN
21
Mastering the E-510
1
2 Turn the control dial to change the setting.
• Press the i button to confirm your setting. Or if you do not operate the control dial within a
few seconds, your setting will be confirmed and the previous screen will be restored.
g “Button timer” (P. 84)
List of direct buttons
The functions assigned to buttons are as shown below.
Setting on the menu
1 Press the MENU button.
• The menu is displayed on the LCD monitor.
No. Direct buttons Function Ref. page
1 j/Y/<
Sequential shooting/Self-timer/
Remote control button
Sequential shooting/Self-timer/
Remote control
P. 45
2 F Exposure compensation button Exposure compensation P. 55
3 P AF frame button AF frame selection P. 49
4 o Image stabilizer button Sets image stabilizer P. 36
5 u Live view button Turns live view on or off P. 23
6 # Flash button
Pops up the flash and sets flash
mode
P. 41
7 WB White balance button Sets white balance P. 57
8 AF Focus mode button Sets focus mode P. 49
9 ISO ISO button Sets ISO sensitivity P. 56
10 d Metering button Sets metering mode P. 54
CUSTOM RESET
SETTING
Operation guide is displayed at the bottom of the screen.
: Press MENU to cancel the setting.
: Press dac to select the item.
The illustration displayed corresponds to the arrow pad shown
below.
: a : c : d : b
: Press i to confirm your settings.
MENU
CANCEL
SELECT
OK
GO
MENU button
p Arrow pad
i button
s0010_e_00_unified.book Page 21 Monday, April 9, 2007 6:12 PM
To Next Page
Loading...
