EN
73
Playback functions
4
Lets you erase recorded images. You can select single-frame erase, which erases only the
currently displayed image; all-frame erase, which erases all the images stored on the card; or
selected frame erase, which erases only the frames selected.
Single-frame erase
1 Play back the image you want to erase.
2 Press the S (erase) button.
3 Use ac to select [YES], then press i.
TIPS
To erase immediately:
J If you have set [QUICK ERASE] (gP. 81) to [ON],
pressing the S button will erase an image immediately.
Erasing images
x Notes
• When you perform all-frame or selected frame erase on images recorded using RAW+JPEG,
both the RAW and JPEG images are erased. When using single-frame erase, you can select
whether to erase the JPEG, RAW, or both RAW and JPEG images. g “Erasing RAW and
JPEG files” (P. 81)
• Protected images cannot be erased. Cancel protected images, then erase them.
• Once erased, images cannot be restored. g “Protecting images k Preventing accidental
erasure” (P. 72)
S button
s0010_e_00_unified.book Page 73 Monday, April 9, 2007 6:12 PM
To Next Page
Loading...
