EN
75
Customizing the settings/functions of your camera
5
5
Customizing the settings/functions of your camera
Normally, current camera settings (including any changes you have made) are retained when
the power is turned off. However, this camera features [RESET] that restores the factory
default settings and [RESET1] and [RESET2] that restores settings registered in advance.
The camera settings at that time are registered in [RESET1] and [RESET2].
MENU[W][CUSTOM RESET SETTING]
[RESET]/[RESET1]/[RESET2]
• If settings have already been registered, [SET] is displayed next to the [RESET1]/[RESET2]
option.
Registering reset settings
1 Select either [RESET1]/[RESET2] to register
and press the d button.
2 Select [SET] and press the i button.
• To cancel the registration, select [RESET].
Using reset settings
You can reset the camera to [RESET1] or [RESET2] setting or restore the factory default
settings.
[RESET]: Resets to the factory default settings. For the
factory default settings, see “Menu
directory” (g P. 109).
[RESET1]/[RESET2]:
Resets to the registered settings.
1 Select either [RESET]/[RESET1]/[RESET2]
and press the i button.
2 Use ac to select [YES], then press i.
Custom reset setting
s0010_e_00_unified.book Page 75 Monday, April 9, 2007 6:12 PM
To Next Page
Loading...
