74
EN
Playback functions
4
Erasing selected frames
This function lets you erase selected images at one time during single-frame playback or
index display.
1 Display the images you want to erase and press the i button.
• The selected images will be shown with red frames.
• To cancel your selection, press the i button again.
• During index display, press p to select the images you want to erase and press the i
button.
2 Press p to display the next images you want to erase and press the i
button.
3 After you have selected the images to erase,
press the S (erase) button.
4 Use ac to select [YES], then press i.
Priority setting
In the [Z] menu, [PRIORITY SET] (gP. 80) allows you to set
the initial position of the cursor to [YES].
All-frame erase
1 MENU[W][CARD SETUP]
2 Use ac to select [ALL ERASE], then
press i.
3 Use ac to select [YES], then press i.
• All frames will be erased.
s0010_e_00_unified.book Page 74 Monday, April 9, 2007 6:12 PM
To Next Page
Loading...
