What to do if my Olympus Analytical Instruments shows 'RECORDING MEDIA FULL'?
To address a 'RECORDING MEDIA FULL' error on your Olympus Analytical Instruments, delete any unnecessary data from the USB flash drive to free up space. Alternatively, replace the current USB flash drive with a new one.
Why my Olympus Analytical Instruments system cannot be turned on?
If the system cannot be turned on, ensure the AC adapter or battery is correctly connected. Also, verify that you are pressing the power button on the main unit. If it still fails to turn on, check that you are using the designated AC adapter or battery for the Olympus Analytical Instruments.
What to do if I see a 'LOW BATTERY' message on my Olympus Analytical Instruments?
If you see a 'LOW BATTERY' message on your Olympus Analytical Instruments, immediately stop any image recording, copying, USB formatting, or deleting operations. Replace the battery or connect the AC adapter to continue using the instrument.
General| Brand | Olympus |
|---|---|
| Model | IPLEX IV9675RT |
| Category | Analytical Instruments |
| Language | English |
Explains signal words used throughout the manual for hazards and notes.
Lists general guidelines for safe handling and operation of the instrument.
Details critical safety guidelines for handling and charging batteries.
Covers steps for preparing the power supply before instrument use.
Details essential procedures to perform before operating the instrument.
Lists items to inspect before and after using the instrument.
Guides on inserting the insertion tube and operating angulation for observation.
Covers functions like freezing, zooming, and adjusting image brightness.
Details the procedures for capturing still and movie images.
Guides on viewing recorded images in full-screen or thumbnail views.
Outlines the step-by-step sequence for performing stereo measurements.
Details the correct procedure for mounting the stereo optical adapter.
Explains how to add or update stereo optical adapter information in the main unit.
Verifies the accuracy of measurement values before and after operations.
Covers selecting measurement methods and specifying measurement points.
Provides solutions for common error messages and operational problems.
To Next Page