22
33 Pre-operation preparation and inspection
Be sure to perform the preparation and inspection described in this chapter before using the
instrument. At the first sign of any abnormality, immediately stop using the instrument and
perform the required actions as described in “8 Troubleshooting” (page96).
Inspections are not only required before use but also should be conducted periodically.
Make sure that the power of the instrument is turned OFF before performing the
pre-operation preparation and inspection.
3-1 Transporting of the carrying case
When using the handle
Towing using the extendable handle
Ensure that the latch is closed firmly before lifting the carrying case.
Handle
Top cover
Latch
Latch PUSH button
Extendable
handle
Make sure that the latch is completely closed.
Press the PUSH button to unlock the handle and then extend it.
Press the PUSH button again to unlock the handle and then store it.
Hold the handle to lift one side of the carrying case and move it by rolling the wheels
on the bottom of the carrying case along the ground.
1
2
3
1 2 3
To Next Page
Loading...
