31
IPLEX NX
Rotate the nut of the optical adapter clockwise until the con-
necting screw thread passes over the first screw thread.
After passing the first screw thread, rotate the entire main body
of the optical adapter clockwise while pushing gently until the
optical adapter main body fits into the positioning groove of
the insertion tube and stops rotating anymore.
Rotate the nut of the optical adapter clockwise to attach the
connecting screw thread to the second screw thread. Tighten
the nut until it stops completely.
12
3
4
Remove the optical adapter in the reverse order of the attaching procedures.
Removing the optical adapter
Optical adapter
Optical adapter
main body
Nut
To Next Page
Loading...
