Olympus IR-500 - Setting Serial Numbers for File Names (FILE NAME)

164
Chapter 7: Customizing your camera
Setting serial numbers for file names (FILE NAME)
2 Press a/c to select “REC VIEW.”
Press d to enter the Rec View settings.
3 Press a/c to select “ON” or “OFF,” then press 9.
Rec View is enabled or disabled and the screen returns to the setup menu.
Setting serial numbers for file names (FILE
NAME)
There are two file naming methods, “RESET” or “AUTO.” The default setting is “RESET.” To
set serial numbers for file names, select “AUTO.”
A file name and folder name (for the folder containing the file) are created automatically for each
recorded image. File and folder names are assigned as shown below, using a file number (0001–
9999) and folder number (100–999), respectively.
ERASE STORED IMAGE
SHUTTER SOUND
BEEP
REC VIEW
OFF
ON
\DCIM\***OLYMP\Pmdd****.JPG
Folder number
(100–999)
File nameFolder name
Month (1–C)
Day (01–31)
File number (0001–9999)
• Months January through September are expressed by the numbers 1 through 9,
October by the letter A, November by B, and December by C.
00E Adam .book Page 164 Tuesday, November 9, 2004 3:24 PM