216
Chapter 9: Using images with your computer
Displaying camera images on computer
4 Click the [Browse images now] button.
The image transferred into the browse window is
displayed.
To return to the main menu, click [Menu] in the
browse window.
Disconnecting the camera
The camera can be disconnected after transferring the camera images to your computer.
1 Make sure that the card access
lamp on the camera is not lit.
2 For Windows 98SE
A Double click the [My Computer] icon, then right click
[Removable Disk] to display the menu.
B Click [Eject] in the menu.
Note
Never open the battery/card cover or disconnect/connect the AC adapter while the card access lamp is
blinking. There is a possibility that the data could be corrupted.
O
K
Card access
lamp
00E Adam .book Page 216 Tuesday, November 9, 2004 3:24 PM
To Next Page
Loading...
