Olympus IR-500 - Compensating for Camera Movement (IMAGE STABILIZER)

92
Chapter 4: Setting according to shooting conditions
Compensating for camera movement (IMAGE STABILIZER)
Compensating for camera movement
(IMAGE STABILIZER)
The image stabilizer function reduces blurry images from camera movement. This works by
changing the image capturing area on the CCD according to the movement of the subject before
recording the image. The picture shot using the image stabilizer function is slightly enlarged.
1 Turn the mode dial to n.
2 Press p to select the shooting menu, then press a/c to select
“IMAGE STABILIZER.”
Press d to enter the “IMAGE STABILIZER” settings, then press a/c to select “ON.”
3 Press 9.
The image stabilizer function is enabled. Press p to start shooting a movie with the new
settings.
O
P
E
N
Q
U
I
C
K
V
IE
W
O
P
E
N
P
O
W
E
R
O
K
Mode dial
9 button
abcd
buttons
p button
IMAGE STABILIZER
DIGITAL ZOOM
WB
OFF
ON
00E Adam .book Page 92 Tuesday, November 9, 2004 3:24 PM